• Sopelica INU-58

    Zbirka: Institute of Ethnology and Folklore Research

    Anonymous
    2. pol. 20.st.

    Wood, Woodturning, Hand made

    A=305 D2=32 E5=23
    B=260 E1=115 E6=23
    C1=31 E2=23 F=14
    C2=34 E3=23 G=8
    D1=24 E4=23 H=4,5

     


    The instrument has seven finger-holes, one of which is a thumb hole on the lower side in line with the first. The sopelica is decorated with a larger number of turned thin parallel rings, ridges and grooves.

  • Great sopela INU-67

    Zbirka: Institute of Ethnology and Folklore Research

    Miro Blažina-Pikutar
    oko/cca 1960. , Marčana

    Wood, Woodturning, Hand made

    A=590 E1=125 E5=27 E9= /
    B= / E2=28 E6=27 E10=/
    C=88 E3=28 E7=83 F=5
    D=25 E4=67 E8=55  

    The instrument has six finger-holes . There are two vent-holes on the bell and one was drilled through the pipe on both sides. The sopela is decorated with ridges and grooves made on a lathe. A part of the bell is broken; the pirouette and the stop that holds it are missing. Sopela has been cut longitudinally across the central axis in order to understand the making techniques of the bell and the conical pipe from inside. Sopela was glued afterwards.

  • Šurle NN

    Zbirka: Institute of Ethnology and Folklore Research

    Đuro Adamović
    1996. , Zagreb

    Wood, Woodturning

    chanter  stock   reeds 
    A=165 E1=62 F=5 H=64 d1=48
    B=19 E2=20 G=4 I=51 Ø1=6
    C1=30,5 E3=20   J=44 d2=48
    C2=16 E4=20     Ø2=6
    D=12        

     

    La canna destra ha quattro fori digitali sul lato anteriore e quella sinistra tre. Sulla canna destra, parallelamente con il primo, è traforato il foro per il pollice. Lo strumento è decorato molto semplicemente sul blocco con un paio di anelli paralleli fatti sul tornio col filo rovente. Dentro il blocco ci sono gli iniziali del costruttore "Đ.A.". Lo strumento non è masi stato usato.

  • Dvojnice NN

    Zbirka: Institute of Ethnology and Folklore Research

    Anton Peteh
    sredina 20. st./sec. XX, meta'/ half 20th cent. , Petešljari (Žminj)

    Wood, Hand made

    A=350 D=48 E4=27
    B=305 E1=200 F=15
    C=49 E2=25 G=6
      E3=27  

     

    The instrument has four finger-holes on the right pipe and three on the left. There is no thumb hole. At the top, middle and bottom of the instrument there are geometric decorations made by an incandescent wire; the central cross ornament and parallel tiny lines on the pipes. The upper part was probably reinforced with a wire. Between the tubes it was made a cut.

  • Šurle INU-37

    Zbirka: Institute of Ethnology and Folklore Research

    Anton Peteh
    2. pol. 20. st. , Petešljari (Žminj)

    Wood, Woodturning, Hand made

    chanter  stock   reeds 
    A=170 E1=68 F=5 H=58 d1=46
    B=23 E2=17 G=4 I=56 Ø1=5
    C1=34 E3=17   J=54 d2=46
    C2=18,5 E4=17     Ø2=5
    D=14        

     

    The right pipe of the instrument has four finger-holes, and the left one three. The stock is slightly concave on the front and on the rear side. The concavity slightly and gently spreads towards the chanters. The instrument is completely handmade and it doesn't have any decoration.

  • Sopelica INU-58

    Zbirka: Institute of Ethnology and Folklore Research

    Anonymous
    2. pol. 20.st.

    Wood, Woodturning, Hand made

    A=305 D2=32 E5=23
    B=260 E1=115 E6=23
    C1=31 E2=23 F=14
    C2=34 E3=23 G=8
    D1=24 E4=23 H=4,5

     


    The instrument has seven finger-holes, one of which is a thumb hole on the lower side in line with the first. The sopelica is decorated with a larger number of turned thin parallel rings, ridges and grooves.

  • Great sopela INU-67

    Zbirka: Institute of Ethnology and Folklore Research

    Miro Blažina-Pikutar
    oko/cca 1960. , Marčana

    Wood, Woodturning, Hand made

    A=590 E1=125 E5=27 E9= /
    B= / E2=28 E6=27 E10=/
    C=88 E3=28 E7=83 F=5
    D=25 E4=67 E8=55  

    The instrument has six finger-holes . There are two vent-holes on the bell and one was drilled through the pipe on both sides. The sopela is decorated with ridges and grooves made on a lathe. A part of the bell is broken; the pirouette and the stop that holds it are missing. Sopela has been cut longitudinally across the central axis in order to understand the making techniques of the bell and the conical pipe from inside. Sopela was glued afterwards.

  • Šurle NN

    Zbirka: Institute of Ethnology and Folklore Research

    Đuro Adamović
    1996. , Zagreb

    Wood, Woodturning

    chanter  stock   reeds 
    A=165 E1=62 F=5 H=64 d1=48
    B=19 E2=20 G=4 I=51 Ø1=6
    C1=30,5 E3=20   J=44 d2=48
    C2=16 E4=20     Ø2=6
    D=12        

     

    La canna destra ha quattro fori digitali sul lato anteriore e quella sinistra tre. Sulla canna destra, parallelamente con il primo, è traforato il foro per il pollice. Lo strumento è decorato molto semplicemente sul blocco con un paio di anelli paralleli fatti sul tornio col filo rovente. Dentro il blocco ci sono gli iniziali del costruttore "Đ.A.". Lo strumento non è masi stato usato.

  • Dvojnice NN

    Zbirka: Institute of Ethnology and Folklore Research

    Anton Peteh
    sredina 20. st./sec. XX, meta'/ half 20th cent. , Petešljari (Žminj)

    Wood, Hand made

    A=350 D=48 E4=27
    B=305 E1=200 F=15
    C=49 E2=25 G=6
      E3=27  

     

    The instrument has four finger-holes on the right pipe and three on the left. There is no thumb hole. At the top, middle and bottom of the instrument there are geometric decorations made by an incandescent wire; the central cross ornament and parallel tiny lines on the pipes. The upper part was probably reinforced with a wire. Between the tubes it was made a cut.

  • Šurle INU-37

    Zbirka: Institute of Ethnology and Folklore Research

    Anton Peteh
    2. pol. 20. st. , Petešljari (Žminj)

    Wood, Woodturning, Hand made

    chanter  stock   reeds 
    A=170 E1=68 F=5 H=58 d1=46
    B=23 E2=17 G=4 I=56 Ø1=5
    C1=34 E3=17   J=54 d2=46
    C2=18,5 E4=17     Ø2=5
    D=14        

     

    The right pipe of the instrument has four finger-holes, and the left one three. The stock is slightly concave on the front and on the rear side. The concavity slightly and gently spreads towards the chanters. The instrument is completely handmade and it doesn't have any decoration.

  • Sopelica INU-58

    Zbirka: Institute of Ethnology and Folklore Research

    Anonymous
    2. pol. 20.st.

    Wood, Woodturning, Hand made

    A=305 D2=32 E5=23
    B=260 E1=115 E6=23
    C1=31 E2=23 F=14
    C2=34 E3=23 G=8
    D1=24 E4=23 H=4,5

     


    The instrument has seven finger-holes, one of which is a thumb hole on the lower side in line with the first. The sopelica is decorated with a larger number of turned thin parallel rings, ridges and grooves.

  • Great sopela INU-67

    Zbirka: Institute of Ethnology and Folklore Research

    Miro Blažina-Pikutar
    oko/cca 1960. , Marčana

    Wood, Woodturning, Hand made

    A=590 E1=125 E5=27 E9= /
    B= / E2=28 E6=27 E10=/
    C=88 E3=28 E7=83 F=5
    D=25 E4=67 E8=55  

    The instrument has six finger-holes . There are two vent-holes on the bell and one was drilled through the pipe on both sides. The sopela is decorated with ridges and grooves made on a lathe. A part of the bell is broken; the pirouette and the stop that holds it are missing. Sopela has been cut longitudinally across the central axis in order to understand the making techniques of the bell and the conical pipe from inside. Sopela was glued afterwards.

  • Šurle NN

    Zbirka: Institute of Ethnology and Folklore Research

    Đuro Adamović
    1996. , Zagreb

    Wood, Woodturning

    chanter  stock   reeds 
    A=165 E1=62 F=5 H=64 d1=48
    B=19 E2=20 G=4 I=51 Ø1=6
    C1=30,5 E3=20   J=44 d2=48
    C2=16 E4=20     Ø2=6
    D=12        

     

    La canna destra ha quattro fori digitali sul lato anteriore e quella sinistra tre. Sulla canna destra, parallelamente con il primo, è traforato il foro per il pollice. Lo strumento è decorato molto semplicemente sul blocco con un paio di anelli paralleli fatti sul tornio col filo rovente. Dentro il blocco ci sono gli iniziali del costruttore "Đ.A.". Lo strumento non è masi stato usato.